# How Taxi Pricing Works (Guide)

- Link: https://samtaxiservice.com/pricing-guide-6c5e00a6/
- Published: 2026-08-21T18:51:17+00:00
- Author: osaamabnkar

## How to set your taxi prices (the easy way)

You have a simple screen for pricing: **SAM Taxi → Simple Pricing**. You set a fixed
price for a **route** — a **From** city and a **To** city — and type a price for
each vehicle. That price is used only for trips on that route, so a long ride never
costs the same as a short one.

### Add a route price

 1. Go to **SAM Taxi → Simple Pricing → Add a city price**.
 2. **From** — the city the ride starts in (e.g. `Buffalo`) and its state (`NY`).
 3. **To** — the city the ride ends in (e.g. `Niagara Falls`) and its state (`ON` or`
    NY`).
 4. **Both directions** — leave this ticked and the same price covers the return trip
    too, so you enter the route only once.
 5. **Price per vehicle** — type your price for Sedan, SUV, Minivan, Minibus. Leave
    a box empty for a vehicle you do not offer.

Save, and only trips on that exact route use your price. Round trips double automatically.

### Your Niagara Falls example (two hotels, two countries)

You have one hotel in **Niagara Falls, Ontario (Canada)** and one in **Niagara Falls,
New York (USA)**. Same city name — but the **state / province** tells them apart,
so each gets its own price. Set the airport-to-hotel route for each:

 | From | To | Both ways? | Sedan | 
  | Buffalo, **NY** | Niagara Falls, **ON** | Yes | your Canada price | 
 | Buffalo, **NY** | Niagara Falls, **NY** | Yes | your USA price |

Now, automatically:

 * A trip to the hotel at _6740 Fallsview Blvd, Niagara Falls, **ON**_ → uses your**
   Ontario** price.
 * A trip to the hotel at _300 3rd St, Niagara Falls, **NY**_ → uses your **New 
   York** price.
 * The return trips (hotel → Buffalo) use the same price, because “Both directions”
   is on.

The two are never mixed up, even though the hotels are less than a mile apart across
the border — because the system uses the state (ON vs NY), not the distance.

### See how the route changes the price

These sample rows all end at the **same place** — Niagara Falls, NY — but start 
from different cities. Notice the price rises as the pickup gets farther away. That
is the whole point: the price follows the route, not just the destination.

 | From (pickup) | To (destination) | Sedan price | 
  | Buffalo, NY (nearby) | Niagara Falls, NY | **$85** | 
 | Rochester, NY (~1 hr) | Niagara Falls, NY | **$130** | 
 | Toronto, ON (~1.5 hr) | Niagara Falls, NY | **$170** | 
 | Cleveland, OH (far) | Niagara Falls, NY | **$300** |

And holding the pickup steady while the **destination** changes does the same — 
two routes out of Buffalo, one to each hotel:

 | From (pickup) | To (destination) | Sedan price | 
  | Buffalo, NY | Niagara Falls, **NY** (USA hotel) | **$85** | 
 | Buffalo, NY | Niagara Falls, **ON** (Canada hotel) | **$120** |

These are example numbers already loaded on your Simple Pricing screen so you can
try them — replace them with your real prices any time.

### Why the From _and_ To both matter

A price belongs to a route, not to a single city. If you only named the destination,
a passenger coming from 5 minutes away and one coming from two hours away would 
pay the same — which is not what you want. By setting both ends, each route carries
its own fair price.

### Good to know

 * **Only city and state matter.** The system reads the city and state from each
   address to pick the route. No coordinates, no map circles.
 * **State can be short or full.** “NY” or “New York”, “ON” or “Ontario” — both 
   work.
 * **Both directions** (ticked by default) means you enter a route once and it works
   each way.
 * **Flat price out of one town?** Leave the _To_ boxes blank and the price applies
   to any destination from that From city. Most of the time you will fill both.
 * **Anything with no route set** still gets a price automatically from distance,
   so a customer always sees a fare. Add the route whenever you want an exact price.
 * **Round trips** double the price automatically.

### One important tip

Type each city exactly as it appears in the address — “**Niagara Falls**” matches;
a different spelling would not. If a price does not apply, that is almost always
why.

---

There is also an advanced method (Routes/Zones + Fare rules) for special cases like
pricing by a map circle or by postal code — but for normal route pricing, **Simple
Pricing is all you need.**

---

### Before you go live: three quick settings

Open **WordPress admin → SAM Taxi → Settings → Booking Rules** and fill in these
three fields. They appear in the emails your customers receive.

 1. **Contact information** — your business name, phone and email. This is shown at
    the bottom of the booking confirmation and the thank-you email. One item per line.
 2. **Booking policy** — your cancellation and change rules in plain words. This is
    included in every booking confirmation email.
 3. **Google review link** — paste your Google review / Google Maps page URL. When 
    a trip is completed, the customer automatically gets a thank-you email with a _“
    Leave us a Google review”_ button pointing here. **The button only appears once
    this link is set**, so add it to start collecting reviews.

Two other rules live on the same screen and are already set the way you asked: customers
can change a booking up to **4 hours** before pickup, and cancel up to **24 hours**
before pickup. You can adjust these numbers any time.
